Adjusting the Speaker Volume Balance

This unit is set to the standard level before shipping from the factory. You may not need any adjustment.

However, depending on the size of the room and the placement of the speakers, you may benefit from a fine adjustment.

In this case, follow the steps below. Please use the remote control when the test tone sounds.

Note:

Do not connect the headphones.

1.Press [FUNCTION] to select “DVD/CD”.

2.Press [n] to stop playback completely.

3.Press [TEST] on the remote control.

The “Speaker” screen appears on the TV screen.

“FNT-L 0” appears on the display.

The test tone will be heard from each speaker sequentially as follows:

TV screen

FL display

Speaker

Front-L

FNT-L 0

Front left speaker

Center

CENT 0

Center speaker

Front-R

FNT-R 0

Front right speaker

Surround-R

SUR-R 0

Rear (surround right) speaker

Surround-L

SUR-L 0

Rear (surround left) speaker

Note:

There are Surround left and right speakers in the rear speaker.

4.Press [VOLUME] + or - until the test tone becomes a comfortable level.

5.If the test tone level is not the same from each speaker, press [p] or [o] to adjust it while the speaker is activated.

The level appears on the TV screen and display.

Front-L: “-10” ~ “0” appears.

Center: “-10” ~ “+10” appears.

Front-R: “-10” ~ “0” appears.

Surround-R: “-10” ~ “+10” appears.

Surround-L: “-10” ~ “+10” appears.

If necessary, repeat this step again.

6.Press [TEST] to turn the test tone off. Note:

If no adjustments are made, the original display returns after the test tone has cycled around 5 times.

Adjusting the Sub-woofer Level

Note:

Do not connect the headphones.

1.Press [TRIM] while holding [SHIFT] down. “FNT-L 0” appears on the display.

Note: No test tone.

2.Press [ENTER] repeatedly to select “SUB.W 0”. Note:

Each time the button is pressed, the display will show the selected speaker and tone level.

3.Press [p] or [o] to adjust the level as desired. SUB.W: “-10” ~ “+10” appears.

Note:

If another speaker is selected, the level can also be changed as above.

4.Press [TRIM] while holding [SHIFT] down to turn it off. Note:

If no adjustments are made, the original display returns after approximately 10 seconds.

IMPORTANT INFORMATION:

Set the delay time for your center and surround speakers. See “Setting Audio” on page E36.

-E19-

Page 20
Image 20
Sanyo DWM-4500 Adjusting the Speaker Volume Balance, Adjusting the Sub-woofer Level, TV screen FL display Speaker

DWM-4500 specifications

The Sanyo DWM-4500 is a state-of-the-art dual cassette deck that has earned a reputation for its superior sound quality and versatile playback capabilities. Introduced in the late 1990s, this model showcases Sanyo’s dedication to audio excellence, specifically designed for music enthusiasts who appreciate the nuances of analog recording and playback.

One of the main features of the DWM-4500 is its dual cassette mechanism, allowing users to play and record from both tape decks. This feature is particularly beneficial for those who wish to compile mixtapes or transfer music from one cassette to another without needing an external device. Additionally, the ability to select either tape deck for playback offers flexibility and convenience, appealing to dual cassette collectors.

The DWM-4500 is equipped with high-speed dubbing capabilities, enabling rapid copying of cassette recordings. This means users can effortlessly create duplicates of their favorite tapes, maintaining quality while saving time. The system supports both normal and high-speed dubbing, accommodating a variety of user needs.

In terms of sound quality, Sanyo has integrated advanced noise reduction technologies, such as Dolby B and C, which effectively minimize background hiss typical in cassette tapes. This ensures that recordings maintain clarity and fidelity, allowing listeners to experience music as it was intended by the artist.

Another noteworthy characteristic of the DWM-4500 is its user-friendly interface. It features an easily navigable control panel that allows for precise adjustments, including pitch control and cueing options. The LCD display provides clear visibility of settings and track information, enhancing the overall user experience.

The robust construction of the DWM-4500 also stands out. Designed with durability in mind, the unit features high-quality materials to withstand regular use, making it a reliable choice for both casual listeners and dedicated audiophiles.

In summary, the Sanyo DWM-4500 is a remarkable cassette deck that combines functionality with high-quality audio performance. Its dual cassette capability, high-speed dubbing, noise reduction technologies, and intuitive design make it a must-have for anyone looking to rediscover the charm of cassette tapes while enjoying modern audio conveniences.