Sony DVP-NS72HP manual Checking the audio signal format, 47US, Example, About audio signals

Notes

•While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,” “2:1/L,” or “2:2/R.”

•When playing in DVD-VR mode: If you connect to an audio component using the DIGITAL OUT (COAXIAL or OPTICAL)/HDMI OUT jack and want to switch between the sound tracks, set “DOLBY DIGITAL” to “D-PCM” in “AUDIO SETUP” (page 62).

•If “MODE (MP3, JPEG)” is set to “AUTO” or “AUTO (BGM)” (page 53), you can hear the player’s internal background sound when MP3 is not played.

Checking the audio signal format

You can check the audio signal format by pressing AUDIO repeatedly during playback. The format of the current audio signal (Dolby Digital, DTS, PCM, etc.) appears as shown below.

Example:

Dolby Digital 5.1 ch

Rear (L/R)

1:ENGLISH DOLBY DIGITAL 3 / 2 .1

Front (L/R)	LFE (Low Frequency
+ Center	Effect)

About audio signals

Audio signals recorded in a disc contain the sound elements (channels) shown below. Each channel is output from a separate speaker.

•Front (L)

•Front (R)

•Center

•Rear (L)

•Rear (R)

•Rear (Monaural): This signal can be either the Dolby Surround Sound processed signals or the Dolby Digital sound’s monaural rear audio signals.

•LFE (Low Frequency Effect) signal

Note

If “DTS” is set to “OFF” in “AUDIO SETUP” (page 62), the DTS track selection option will not appear on the screen even if the disc contains DTS tracks.

Sound Adjustments

47US