Sony DVP-NS72HP manual Settings for the Display, TV Type, Hdmi Resolution, To reset the setting

Settings for the Display

(SCREEN SETUP)

Choose settings according to the TV to be connected.

Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 55).

The default settings are underlined.

SCREEN SETUP

TV TYPE:	16:9
HDMI RESOLUTION:	AUTO (1920×1080p)
JPEG RESOLUTION:	HD

YCBCR/RGB (HDMI):		YCBCR
SCREEN SAVER:		ON
BACKGROUND:	JACKET PICTURE
BLACK LEVEL:		ON
BLACK LEVEL (COMPONENT OUT):		OFF
4:3 OUTPUT:		FULL

◆TV TYPE

Selects the aspect ratio of the connected TV (4:3 standard or wide).

16:9	Select this when you connect a
	wide-screen TV or a TV with a
	wide mode function.
4:3	Select this when you connect a
LETTER	4:3 screen TV. Displays a wide
BOX	picture with bands on the upper
	and lower portions of the
	screen.
4:3	Select this when you connect a
PAN SCAN	4:3 screen TV. Automatically
	displays the wide picture on the
	entire screen and cuts off the
	portions that do not fit.
16:9

4:3 LETTER BOX

4:3 PAN SCAN

Note

Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.

◆HDMI RESOLUTION

Selects the type of video signals output from the HDMI OUT jack. When you select AUTO (1920⋅ 1080p) (default), the player outputs video signals of the highest resolution acceptable for your TV. If the picture is not clear, natural or to your satisfaction, try another option that suits the disc and your TV/projector, etc. For details, refer also to the instruction manual supplied with the TV/ projector, etc.

AUTO	Normally, select this.
(1920⋅ 1080p)
1920⋅ 1080i	Sends 1920⋅ 1080i video
	signals.
1280⋅ 720p	Sends 1280⋅ 720p video
	signals.
720⋅ 480p	Sends 720⋅ 480p video signals.

To reset the setting

If the picture does not appear normal or goes blank, press [/1 to turn off the player, and enter “369” using the number buttons on the remote, then press [/1 to turn on the player again.

Notes

•In case of “AUTO (1920⋅ 1080p),” the player automatically adjusts the video signals that are suitable for the TV.

Other cases, the player directly send the signal even if TV cannot accept.

•When the HDMI indicator on the front panel lights up, images from the S VIDEO OUT and

LINE OUT (VIDEO) jacks are enlarged vertically. (Except when 720⋅ 480p is selected).

◆JPEG RESOLUTION

Selects the type of JPEG resolution so that you can enjoy high picture quality via your HDMI connection.

You cannot select this when “HDMI RESOLUTION” is set to “720⋅ 480p” or “TV TYPE” is set to “4:3 LETTER BOX” or “4:3 PAN SCAN”.

Settings and Adjustments

,continued 57US