Teac AG-15D owner manual Surround Mode, IN-AUTOdefault, In-Dts, In-Pcm, English

1

2

64

Surround Mode 1

<When EXTERNAL IN is selected, the DSP and the AUTO button do not work.

1If a digital device is connected to DIGITAL IN terminals, select desired decoding mode by pressing the AUTO button.

Each time the AUTO button is pressed, the decoding mode is changed as follows:

IN-AUTO (default):

The appropriate decoding mode is selected automatically. Usually, select this.

IN-DTS:

Select this only when the input signal is DTS.

IN-PCM:

Select this only when the input signal is PCM.

<The AUTO button works only when the function is set to VIDEO or CD and the digital input is selected.

<When IN-AUTO is selected, noise may be heard during playback of a DVD recorded in DTS format. In this case, select IN-DTS.

<If the selected decoding mode does not match with the input signal, “DIGITAL” indicator will blink and no sound will be heard.

2Select the desired surround mode by pressing the DSP button.

Each time the DSP button is pressed, the surround mode changes.

AWhen Dolby Digital signals are input and IN-AUTO is selected, the surround mode is set to DOLBY DIGITAL automatically.

If you press the DSP button, you can select one of the following surround modes:

When the source is Dolby Digital EX:

DOLBY DIGITAL EX, DOLBY VS REF, DOLBY VS WIDE When the source is Dolby Digital 5.1:

DOLBY DIGITAL, DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx MUSIC, DOLBY VS REF, DOLBY VS WIDE

When the source is Dolby Digital 2-channel:

DOLBY PRO LOGIC IIx MOVIE, DOLBY PRO LOGIC IIx MUSIC, DOLBY PRO LOGIC, DOLBY VS REF, DOLBY VS WIDE

BWhen DTS signals are input and IN-AUTO or IN-DTS is selected, the surround mode is set to DTS or DTS-ES automatically.

If you press the DSP button, you can select one of the following surround modes:

When the source is DTS-ES:

DTS-ES, DOLBY VS REF, DOLBY VS WIDE When the source is DTS:

DTS, DTS+NEO:6, DOLBY VS REF, DOLBY VS WIDE

ENGLISH