A

B

6

Connection (FM antenna)

CAUTION:

<Switch off the power to all equipment before making connections.

<Read the instructions of each component you intend to use with this unit.

<Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.

A FM Indoor Antenna

In an area with strong FM signals, the T-type FM antenna provided with this unit is sufficient.

Extend the antenna into a “T” shape and connect the two wires at the base of the “T” to the provided matching transformer, as shown.

After completing connection, plug the transformer into the “FM 75Ω” socket. Extend the top of the “T” and tune the tuner to your favorite station (see page 82). Adjust the antenna in a suitable location like a window frame or wall until the reception is best and then affix the antenna in that position using thumb tacks, push pins or any other suitable means.

B FM Outdoor Antenna

In an area where FM signals are weak, it will be necessary to use an 75-ohm unbalanced-type outdoor FM antenna. Generally, a 3-element antenna will be sufficient; if you live in an area where the FM signals are particularly weak, it may be necessary to use one with 5 or more elements.

<Disconnect the FM indoor antenna when using an outdoor antenna.

ENGLISH

Page 6
Image 6
Teac AG-15D owner manual Connection FM antenna, FM Indoor Antenna, FM Outdoor Antenna