1
MAIN MENU
SPEAKER SETUP
FUNCTION SELECT
SURROUND MODE
CH LEVEL SETUP
AUTO OSD : ON
5b:MOVE
OSD:END ENTER:SEL.
2 3 4
5
94
OSD (On-Screen Display) 1
If a TV is connected to this unit, you can use the OSD (on- screen display) to set up the unit.
Make sure your TV is connected to the receiver and turned on.
<Any
1Press the OSD button.
The main menu appears on the TV screen.
<If a normal TV (4:3) is connected and you press the OSD button during playback of DVD, the screen might be distorted for a short while. It is not a malfunction.
<Use the OSD button to display or exit the Setup menu.
<Buttons which can be used in the menu are shown at the bottom of the screen.
Example:
5b : Press the Up or Down button to move the cursor.
To advance to the next page, press the Up or Down button repeatedly.
gt : Press the Left or Right button to change the setting.
OSD : Press the OSD button to end and exit the main menu.
ENTER : Press the ENTER button to select the setting.
ENTER (blink): Press the ENTER button to change the setting.
2Select a menu using the up/down buttons (5/b).
3Press the ENTER button.
The selected menu appears on the screen.
4Change the setting using the up/down/left/right buttons (5bgt) and the ENTER button. Press the OSD button to go back to the main menu (or the previous page).
See page
Repeat steps 2 to 4 to select and set other items.
5When all the settings have been finished, press the OSD button to exit the main menu.
<Depending on your selections for the input source, input signal, decoding mode, surround mode, speaker settings, etc., the conditions of each menu may differ.
ENGLISH