106

Troubleshooting 2

Cannot view the on-screen display as it rolls rapidly.

eThe color system of the receiver does not match your TV. Connect a PAL TV.

Cannot listen to any station, or signal is too weak. eMake sure the antenna is properly connected.

eTune in the station properly.

eIf a TV is near the unit, turn it off.

eInstall the antenna again after relocating it to a better reception position.

eAn external antenna may be required.

Though the broadcast is stereo, it sounds monaural.

ePress the FM MODE button.

Remote control doesn’t work.

eSelect the component to be controlled by pressing the REMOTE SELECT buttons (RECEIVER, CD, AUX, TV, VCR, DVD, CABLE, SAT) of the remote control unit. (Even when the REMOTE SELECT buttons are pressed without pointing at the main unit, the selection of the remote control unit will be changed.)

If you want to control the receiver, first press the RECEIVER button, and then press buttons to operate.

ePress the POWER switch of the main unit to turn it standby. eIf the batteries are dead, change the batteries.

eUse remote control unit within the range (5m) and point at the front panel.

eClear obstacles between the remote control unit and the main unit.

eIf a strong light is near the unit, turn it off.

If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again.

Maintenance

If the surface of the unit gets dirty, wipe with a soft cloth or use diluted mild liquid soap. Be sure to remove any excess completely. Do not use thinner, benzine or alcohol as they may damage the surface of the unit.

ENGLISH

Page 106
Image 106
Teac AG-15D owner manual Maintenance, Cannot view the on-screen display as it rolls rapidly, EPress the FM Mode button