Teac AG-15D Dubbing from VIDEO 2 or 3 to VIDEO, Dubbing the audio and video signals separately

1

2

62

Dubbing from VIDEO 2 or 3 to VIDEO 1

1Select VIDEO 2 or 3 by turning the FUNCTION knob.

2Start recording on the VCR connected to VIDEO 1 REC jacks.

3Start playback on the VCR connected to VIDEO 2 or 3 INPUT jacks.

The audio and video signals input from VIDEO 2 or 3 are output from VIDEO 1 REC jacks.

<Copy protected DVD discs cannot be dubbed.

<The video signal from S-VIDEO or VIDEO jacks cannot be mixed. Be sure to connect all the components via the same kind of jacks.

Dubbing the audio and video signals separately

While dubbing the video signal of VIDEO 2 or 3, you can replace the sound from VCR with the sound from an audio source such as CD.

1Select the video source to be recorded (VIDEO 2 or 3) using the FUNCTION buttons of the remote control unit.

2Select the audio source to be recorded (CD, TAPE, etc.) using the FUNCTION buttons of the remote control unit. Do not turn the FUNCTION knob of the main unit, or the video source selection in step 1 might be cancelled.

3Start recording on the VCR connected to VIDEO 1 REC jacks.

4Start playback of the video and audio source to be recorded.

The picture from the video component appears on the TV, and the sound from the audio component is output from the speakers.

ENGLISH