Teac AG-15D owner manual Battery Installation, Front Panel Display

Front Panel Display

a b c d e f g h

HVS RDS EON TP TA PTY ST. TUNED					MEMORY
DTS ES 96/24 NEO:6 MPEG	D EX	PL	x DSP AUTO	DIGITAL	DIRECT

b l k j i

adisplays current status.

bsurround mode

cilluminates when RDS function is active.

dilluminates when the multi-channel sound is downmixed to stereo, or when an FM stereo broadcast is tuned.

eilluminates when a station is tuned.

filluminates when sleep timer is set.

gilluminates when preset tuning mode is selected.

hblinks when the MEMORY button is pressed.

imeter

jilluminates when tone control is set to off.

killuminates or blinks when a digital source is selected.

lilluminates when the decoding mode is set to “IN-AUTO”.

Battery Installation

1. Remove the battery compartment cover.

2.Insert two “AAA” (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their positive “+” and negative “_” poles positioned correctly.

3. Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Precautions concerning batteries

<Be sure to insert the batteries with correct positive “+” and negative “_” polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

ENGLISH 23