Teac AG-15D owner manual Numeric buttons, Macro M1, M2, M3

Names of Each Control 2

L

A
B
C	M
	N
D
E
F	O
G	G
H	H
	P

I

J

K

Note:

<To simplify explanations, instructions refer to names of buttons and controls on the front panel, making no mention of the use of remote control unit.

<Names colored in blue are mainly used for the receiver.

Remote Control Unit

A Remote Select buttons (RECEIVER, CD, TAPE/MD, TV, VCR, DVD, CABLE, SAT)

You have to select the device you want to operate by pressing the corresponding button, or the remote control will not work at all.

If you want to operate the receiver, first press the RECEIVER button, and then press other buttons (POWER, VOLUME, etc.) to operate the receiver.

BCH/LEVEL

Use these buttons to adjust the level of each speaker.

When controlling TV or VCR, these buttons can be used to select a channel.

CT.TONE

Use this button to output the test tone.

DDirection buttons (up/down/left/right) Use these buttons to select an item in the OSD.

In FM tuner mode, these buttons are used for RDS function.

EENTER

Use this button to enter your selection.

FSLEEP

Use this button to set sleep timer.

GTUNING

Use these buttons to tune in a station.

HPRESET

Use these buttons to select a preset channel.

ISELECT

After pressing the SP SETUP or the PARAMETER button, use these buttons to change the setting.

JNumeric buttons

When controlling a device other than receiver, these buttons can be used to select track numbers, TV channel, etc.

KMACRO (M1, M2, M3)

Use these buttons to execute the programmed macro functions.

LLED

When buttons are pressed, LED will light.

MMUTING

Use this button to mute the sound temporarily.

NOSD

Use this button to display the OSD (on-screen display).

ODIMMER

Use this button to dim or turn off the display.

PP.SCAN

Use this button to scan preset channels.

22 ENGLISH