TUNING MODE
MEMORY TUNINIG/
PRESET
2
3
1
2
84
Tuner 2
FM MODE Button
Pressing this button alternates between Stereo mode and Mono mode.
Stereo:
FM stereo broadcasts are received in stereo and the “ST” indicator lights in the display.
Mono:
To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.
Preset Tuning
You can store up to 30 stations.
Manual Memory Presetting
1Tune in a station you want to listen to (see steps 1 to 4 of page 82).
2Press the MEMORY button.
3While the “MEMORY” indicator is blinking, select a preset channel to store the station using the TUNING/PRESET buttons (or the PRESET buttons of the remote control unit), and then press the MEMORY button.
To store more stations, repeat steps 1 to 3 .
How to select preset stations
1If “PRESET” indicator isn’t lit, press the TUNING MODE button to select the preset tuning mode.
<When using the remote control unit, you can skip this step.
2Press the TUNING/PRESET buttons (or the PRESET buttons of the remote control unit) repeatedly until the desired preset station is found.
Scanning preset stations
Press the P.SCAN button of the remote control unit. Preset stations stored in memory are scanned at 5 seconds intervals. When the station you want to listen to is found, press the P.SCAN button again to stop scanning.
ENGLISH
