Teac AG-15D Press the Power switch, Unit enters standby mode, and the Standby indicator lights

3

1 2 4 5

1

2

3

4

5

42

Speaker Configuration 2

Speaker Setup

<When no action is taken for 8 seconds, the Speaker Setup mode will be cancelled.

1Press the POWER switch.

The unit enters standby mode, and the STANDBY indicator lights.

2Press the STANDBY/ON switch to turn the unit on. The STANDBY indicator goes off.

3Press the SPEAKER SETUP button.

“SUB-W Y” or “SUB-W N” appears on the display.

Each time the SPEAKER SETUP button is pressed, the mode is changed as follows:

sub-woofer setting speaker size setting (Front) speaker size setting (Center) speaker size setting (Surround) speaker size setting (Surround Back) distance (Front Left)

distance (Front Right) distance (Center) distance (Surround Left) distance (Surround Right) distance (Surround Back Left) distance (Surround Back Right) Crossover Frequency

<The SPEAKER SETUP button will not work when the SPEAKER button is set to off. In that case, press the SPEAKER button to turn the speakers on and then press the SPEAKER SETUP button.

<The SPEAKER SETUP button will not work when EXTERNAL IN is selected. In that case, press the EXTERNAL IN button to turn it off and then press the SPEAKER SETUP button.

4Press the SELECT buttons to change the setting. For details of each setting, see page 44 to 52. Repeat step 3 and 4 to set other configurations.

5When all the configurations has been finished, press the MEMORY button (or the ENTER button of the remote control unit) to save the changes and exit the Speaker Setup mode.

Be sure to press the MEMORY button within 8 seconds, or the changes will be cancelled.

ENGLISH