Sanyo DWM-4500 Conventional TV Connection, Using VIDEO OUT jack, Sub-wooferPowered speaker

Conventional TV Connection

Using VIDEO OUT jack

Connect the Video cable with yellow connectors (supplied) between the VIDEO OUT jack of the sub-woofer and the VIDEO INPUT jack on the TV.

Sub-woofer (Powered speaker)

Important Information:

To connect the unit to a TV, TV must have a Video input jack (RCA-type) at least. You cannot connect it to an antenna terminal of TV.

To VIDEO INPUT jack

TV

To VIDEO OUT jack (Yellow)

Video cable (supplied)

Notes:

•Please refer to your TV instruction manual.

•When you connect the subwoofer to your TV, be sure to turn off the power and disconnect both units from the wall outlet until all the connections have been made.

•Do not connect the VIDEO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks of the sub-woofer to a VCR directly. The playback picture will be distorted because DVD video discs are copy protected.

Using S-VIDEO OUT jack Note:

Please follow the steps before turning on the power.

1.If your TV has the S-VIDEO INPUT jack, connect the *S- video cable (not supplied) as shown in figure. (The VIDEO OUT jack connection is not necessary.)

You can enjoy clearer picture playback.

Sub-woofer (Powered speaker)

Using COMPONENT VIDEO OUT jacks Note:

Please follow the steps before turning on the power.

1.If your TV has the COMPONENT VIDEO INPUT jacks, connect the *Component video cable (not supplied) as shown in figure.

(The VIDEO OUT or S-VIDEO OUT jack connection is not necessary.)

You can enjoy high quality picture playback.

TV with COMPONENT

VIDEO INPUT jacks

Sub-woofer (Powered speaker)

TV with S-VIDEO INPUT jack

Green Blue Red Green Blue Red

*S-video cable (not supplied)

2. Set the VIDEO OUT SELECT switch to the S-VIDEOposition.

*Component Video cable (not supplied)

2.Set the VIDEO OUT SELECT switch to the COMPONENT position.

Main unit (Right side)

Main unit (Right side)

*Please consult your local audio/video dealer.

-E13-