|
| GETTING STARTED |
|
|
|
STARTED |
| For the following explanations, refer to “Parts |
| following: | |
|
| Of The Radio” on page 11. |
|
| TURNING RADIO ON/OFF |
|
| To turn ON the radio, rotate the On/Off/Volume |
|
| Knob clockwise. The radio plays one of the |
GETTING |
| • Power up tone and channel number |
| announcement, or | |
|
| |
|
| • Battery level and channel number |
|
| announcements, or |
|
| • Silent (Audible tones disabled) |
|
| The LED blinks red briefly. |
|
| To turn the radio OFF, rotate the On/Off/Volume |
|
| Knob counterclockwise until you hear a ‘click’ |
|
| and the radio LED Indicator turns OFF. |
| ||
|
| ADJUSTING VOLUME |
|
| Turn the On/Off/Volume Knob clockwise to |
|
| increase the volume, or counterclockwise to |
|
| decrease the volume. |
English 26
Note: Do not hold the radio too close to the ear when the volume is high or when adjusting the volume
SELECTING A CHANNEL
To select a channel, turn the Channel Selector Knob until you reach the desired channel. An audible voice indicates the selected channel.
Each channel has its own Frequency, Interference Eliminator Code and Scan Settings.
TALKING AND MONITORING
It is important to monitor for traffic before transmitting to avoid ‘talking over’ someone who is already transmitting
To monitor, long press and hold the SB1(*) button to access channel traffic. If no activity is present, you will hear ‘static’. To release, press SB1 again. Once channel traffic has cleared, proceed with your call by pressing the PTT button. When transmitting, the LED Indicator stays solid red.
