Notes:
•To listen to all activity on a current channel, short press the SB1 to set the CTCSS/DPL code to 0. This feature is called ‘CTCSS/DPL Defeat (Squelch set to SILENT)’.
•(*) This assumes SB1 is not being programmed for a different mode.
RECEIVING A CALL
1.Select a channel by rotating the Channel Selector Knob until you reach the desired channel. An audible voice indicates the selected channel.
2.Make sure the PTT button is released and listen for voice activity.
3.The LED Indicator stays solid red when the radio is receiving a call.
4.To respond, hold the radio vertically 1 to 2 inches (2.5 to 5cm) from mouth. Press the PTT button to talk; release it to listen.
TALK RANGE
TALK RANGE
|
| Industrial |
|
|
| Model |
|
|
|
| Inside steel/ | Inside multi- |
| |
|
| concrete Industrial |
| |
|
| level buildings |
| |
|
| buildings |
|
|
| UHF 2W | Up to 250,000 Sq. Ft. | Up to 20 Floors |
|
|
|
|
|
|
| VHF 2W | Up to 220,000 Sq. Ft. | Up to 13 Floors |
|
|
|
|
|
|
GETTING STARTED
27English
