•Turn OFF the radio and start over.
5.I just programmed the value I wanted. How do I exit the Programming Mode?
You can either:
•long press the PTT button twice to exit if you’re in the Programming Mode or,
•Long press the PTT button once if you are already in the ‘Idle’ Programming mode.
6.I am done programming the features in this channel. How do I program another channel?
Short press the PTT button several times until you hear “Channel Number”. Switch channel by rotating the Channel Selector Knob. If you wish to save the changes, make sure you are in the ‘Idle’ Programming Mode before switching the channel, otherwise you will lose the changes made.
PROGRAMMING VALUES EXAMPLE
Example of Programming a Frequency
Assuming current frequency value is set to Channel 1, with the UHF default frequency set to ‘02’ (equivalent to 464.5500 MHz), and you want to change it to Frequency Number = ‘13’ (which is mapped to 461.1375 MHz), follow this sequence:
1.Enter Advanced Configuration Mode.
2.Short press the PTT button to enter Frequency Mode. The radio audible voice announces that the current value is ‘2’.
3.Press the SB1 button eleven times to increase frequencies and you will hear frequency “One, three” (13).
4.Long press the PTT button. LED Indicator shows a green heartbeat to indicate ‘Idle’ Programming Mode.
5.Long press the PTT button again to exit Programming Mode or turn OFF the radio.
PROGRAMMING FEATURES
37English
