Sony MJ-L1A manual 3 „ 2, 4 3 „, Playing Tracks in Random Order shuffle play

Playing Tracks in Random Order (shuffle play)

You can play all the tracks on the MD in random order.

POWER m ON 2 1

3 „

2

	p
	P	r
(	+	p
	=	P
	(

1 Press MD.

The unit enters MD play mode.

2 Press PLAY MODE (or P.MODE on the remote) repeatedly until “SHUFFLE” appears in the display.

3 Press fl .

“J ” appears and then all the tracks play in random order.

To cancel shuffle play

Press and then press PLAY MODE repeatedly until “SHUFFLE” and “PROGRAM” disappear from the display. The tracks continue playing in their original order.

To skip an undesired track

Turn the JOG dial clockwise (or press + on the remote).

Playing Tracks in the Desired Order (programme play)

You can programme up to 25 tracks to play in any order you choose. You can do this by designating the tracks in the order you want them to play.

POWER m ON
2	6	1

4 3 „

2 >10

3 p

	P	r
(	+	p
	=	P
	(

6

Numeric buttons

1 Press MD.

The unit enters MD playing mode.

2 Press PLAY MODE (or P.MODE on the remote) repeatedly until “PROGRAM” appears in the display.

3 Turn the JOG dial (or press = /+ on the remote) to choose a track.

The track number and the total playing time including the selected track appear in the display, and the track number flashes in the music calendar. (The programme is not entered at this time.)

›–

Go to previous		Go to next
track		track
	TOC		PROGRAM	1	2	3	4	5
				6	7	8	9	10
		MD		11
		VOLUME
	Track number

4 Press ENTER/YES.

The step number appears for about one second, then the total playing time appears. (This shows that the programme has been entered.)

TOC	PROGRAM	4
	6	9
MD	11
	VOLUME

Total playing time

Last programmed track number

5 To programme additional tracks, repeat steps 3 and 4.

6 Press fl .

All the tracks play in the order you choose.

To cancel the programme play Press and then press PLAY MODE repeatedly until “PROGRAM” and “SHUFFLE” disappears from the display. The tracks continue playing in their original order.

To select tracks using the number buttons on the remote

In step 3, press the number buttons in the order you want to programme. Each time you press a button, the track you selected is programmed.

You don't need to press ENTER/YES. To programme a track with a number greater than 10, press >10 first, then enter the corresponding digits.

If the track number is 100 or more, press >10 twice and enter the number. Example:

To locate track number 30, press >10, 3, and 10 in this order.

To locate track number 100, press >10, >10, 1, 10 and 10 in this order.

To change the programme

To	Operation
Add a track at	1.Turn the JOG dial
the end of the	until the desired track
programme	number appears in
	the display.
	2.Press ENTER/YES.
Erase the entire	During stop, press on
programme	the player.

Notes

•The programme you made remains in the unit even after it has been played back. Press fl to play the same programme again.

•If “--.--” appears instead of the total playing time during programming, this means the total playing time has exceeded 100 minutes. In this case, you can also select other tracks.

GB

13

Chapter 3: Playing MDs