Sony MJ-L1A Inserting the Battery, Step Step, Connecting the Power, connections, Battery life

Front

speaker (R) *

FM lead aerial (supplied)

STEP 2

STEP 1

STEP 3	to a wall outlet
	STEP 1

Front speaker

(L) *

!Do this connection last!

* Front speakers are supplied for MJ-L1 only.

STEP 3 Connecting the

Power

AM loop aerial (supplied)

2 Insert a lithium battery CR2025 with the + side facing up.

a lithium battery

Connect the main lead cord to a wall outletCR2025 after you have made all the above

connections.

/

to a wall outlet	3 Insert the battery case.
	CAUTION

Inserting the

Battery

Install a lithium battery in the supplied remote for remote control.

1 Slide out and remove the battery case.

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommend by the manufacturer. Discard used batteries according to the manufacturer's instructions.

Battery life

You can expect the remote to operate for about six months (using a Sony CR2025 lithium battery) before the battery run down. When the battery no longer operates the remote, replace the battery with a new one.

STEP 2

GB

5

To avoid battery leakage

If you are not going to use the remote for a long time, remove the battery to avoid damage caused by corrosion from battery leakage.

Notes on lithium battery

•Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately consult a doctor.

•Wipe the battery with a dry cloth to assure a good contact.

•Be sure to observe the correct polarity when installing the battery.

•Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

Chapter 1: Setting Up