Sony MJ-L1A manual Nuppercase nlowercase Space Nsymbols NnumbersN, To check the titles

5 Press CHARACTER repeatedly to select the character type.

Each time you press, the character changes as follows:

nuppercase nlowercase

space Nsymbols NnumbersN

You can use the following symbols:

!" # $ % & ' ( ) * + , – . / : ; < = > ? @ _ ` (space)

6 Turn the JOG dial until the desired character appears in the display. The selected character flashes.

TOC		1	2	3	4	5
EDIT		6	7	8	9	10
DISC	MD	11

VOLUME

To enter a space quickly

Press ) while the cursor is flashing.

7 P r e s s ) .

The cursor shifts rightward and stands by for the input of the next character.

TOC			1	2	3	4	5
EDIT			6	7	8	9	10
	DISC	MD	11
			VOLUME

Next character

8 Repeat steps 5 and 7 until you have entered the entire title.

If you want to enter the same type of character, skip step 5.

If you entered the wrong character

Press ) or 0 until the character to be corrected starts flashing, and repeat steps 5 to 7 to enter the correct character.

To erase a character

Press ) or 0 until the character to be erased starts flashing, then press EDIT/NO.

9 Press ENTER/YES.

This completes the labelling procedure and the title scrolls in the display.

To stop before the track has been labelled

Press .

To check the titles

You can check the disc or track name by pressing SCROLL.

To check the	Press SCROLL*
Disc name	While the deck is stopped
Track name	While the deck is playing

*Press SCROLL again to pause, and once more to continue scrolling.

To delete the title of the disc and the titles of all of the tracks

(name erase function)

You can erase all titles on an MD simultaneously.

Note that once erased, titles cannot be recovered. If you want to stop deleting, press .

1While the deck is stopped, press EDIT/ NO repeatedly until “Name Erase?” appears in the display.

2Press ENTER/YES.

“Name Erase ??” appears in the display.

3Press ENTER/YES again. All titles are erased.

GB

21

Chapter 5: Editing Recorded MDs