Sony MJ-L1A manual Timer-RecordingRadio Programmes, 3,4,5,6 4,5, To cancel the timer, Notes

flashing

6 Set the time you want the system to turn off in the same way.

7 Use the JOG dial to select a sound source.

The display changes as follows:

2 Press ENTER/YES.

The minutes digits flash in the display.

CD	MD
DAILY	VOLUME

flashing

3 Use the JOG dial to set the minutes.

CD	MD
DAILY	VOLUME

flashing

4 Press ENTER/YES.

“OFF” appears and the hour digits flash in the display.

CD	MD
DAILY	VOLUME

n CD PLAY ˜ TUNER N

nM D P L A Y N

8 Press ENTER/YES.

The preset items appear in the display sequentially.

9 Press POWER to turn off the system. About 15 seconds before the preset time, the power will go on at the preset time and the music will play. At the turn-off time, the power will go off again.

To cancel the timer

Press TIMER SELECT repeatedly until “TIMER OFF” appears in the display.

To change the timer

Repeat all above procedure from step 1.

You can check the preset items

Press TIMER SELECT repeatedly until “DAILY” appears in the display again. Preset items appear in the display.

Timer-Recording Radio Programmes

You can set the timer to record from the radio at a certain time. This timer works only once for each setting. The volume level is automatically set to MIN.

If you record from a preset station you have assigned a name, the name, on time and off time are stored on the MD automatically.

•Preset the station you want to record. •Make sure the clock has been set correctly.

POWER m ON ,8

TIMERSELECT 2

3,4,5,6 4,5

1 Tune the preset station you want to record.

2 Press TIMER SET repeatedly until the “REC TIMER ?” appears in the display.

3 Press ENTER/YES.

“REC” appears and hour digits flash in the display.

REC VOLUME

flashing

4 Set the time you want the system to start recording.

1 Use the JOG dial to set the hour.

REC VOLUME

flashing

2 Press ENTER/YES.

The minutes digits flash in the display.

	MD
REC	VOLUME

flashing

3 Use the JOG dial to set the minutes.

REC VOLUME

flashing

4 Press ENTER/YES.

“OFF” appears and the hour digits flash in the display.

REC VOLUME

flashing
5 Set the time you want the system to turn
off in the same way.
6 Press ENTER/YES.
The preset items appear in the display
sequentially.
7 Insert a recordable MD.
“TOC Reading” appears in the display
for a few seconds and the MD deck
reads the contents of the MD.
8 After “TOC Reading” disappears from
		GB
the display, press POWER to turn off the	27
system.
About 15 seconds before the preset time,
the power turns on and the volume level
is automatically set to the MIN.
Notes
•Do not turn off the power while “TOC
Reading” appears in the display. The
timer operation may not be performed
correctly.
•If you use a brand new MD, nothing is
recorded for the first 15 seconds.
To cancel the timer
Press TIMER SELECT repeatedly until
“TIMER OFF” appears in the display.
To change the timer
Repeat all above procedure from step 1.
You can check the preset items
Press TIMER SELECT repeatedly until
“REC” appears in the display again. Preset
items appear in the display.

Chapter 8: Additional Features