Acer AS8950G manual Wlan Wireless Local Area Network Module Removal, Wlan Module Installation

WLAN (Wireless Local Area Network) Module Removal

Prerequisite:

Base Door Removal

1.Locate module (D) on lower cover. Refer to Figure 3-6.

2.Disconnect main (A) and auxiliary (B) antenna cables from module as shown in Figure 3-9.

3.Remove screw (C) (M2.5*2.3) from mainboard.

4.Remove module from mainboard connector (D).

B

A

D

C

Figure 3-9. WLAN Module

NOTE: NOTE:

Main (black) antenna connector is close to ODD module. Auxiliary (white) antenna connector is close to battery bay.

WLAN Module Installation

1.Insert module into mainboard connector (D). Refer to Figure 3-9.

2.Install and secure screw (C) (M2.5*2.3) to mainboard.

3.Install main (A) and auxiliary (B) antenna cables on WLAN module.

4.Install base door.

Machine Maintenance Procedures 3-15