Acer AS8950G manual Fingerprint Module Removal, Finger Print Module Installation

Fingerprint Module Removal

Prerequisite:

Upper Cover Removal

1.Locate fingerprint module (E) on upper cover. Refer to Figure 3-25.

2.Disconnect module FFC (A) from module connector (B) as shown in Figure 3-30.

3.Remove module FFC (A) from upper cover.

4.Remove screw (C) (M2.0*3.0-I) from upper cover.

5.Remove module bracket (D) from upper cover.

6.Remove module from upper cover.

D

BA

C

Figure 3-30. Fingerprint Module

Finger Print Module Installation

1.Install module on upper cover.

2.Install module bracket (D) and align with screw hole. Refer to Figure 3-30.

3.Install and secure screw (C) (M2.0*3.0-I) to upper cover.

4.Install module FFC (A) on upper cover.

5.Connect module FFC (A) to module connector (B).

6.Install upper cover.

3-34 Machine Maintenance Procedures