Aussie 6703T8DV31 manual Step Warming Rack / Flavor Activator / Cooking Grid Assembly

12

!CAUTION

To reduce the risk of a laceration hazard:

• Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp.

Step 13

Warming Rack / Flavor Activator / Cooking Grid Assembly

A. Insert Warming Rack leg ends into holes on top edge of firebox. Seat securely.

B.6703 Lay a large Flavor Activator over each Burner on the lower body ridges. Lay two small Flavor Activators be- tween each large Flavor Activator. Each Flavor Activator has individual guides on the body ridges to keep in place.

B.6704 Lay a large Flavor Activator over each Burner on the lower body ridges. Lay a small Flavor Activator between each large Flavor Activator. Each Flavor Activator has individual guides on the body ridges to keep in place.

C. Place the Cooking Grids over the Flavor Activators on the upper Body ridges.

B 6703 B 6704

A

Step 14

Battery in Igniter Installation

Unscrew Igniter Cover and insert AA Bat- tery with the negative “-“ end going in first. Replace the cover and tighten securely.

C

cooking grid

+-

This Completes the Grill Assembly.