Acer AS8950G manual Slave HDD Module Removal, Slave HDD Module Installation

Slave HDD Module Removal

Prerequisite:

Slave HDD Door Removal

1.Locate module (B) on lower cover. Refer to Figure 3-6.

2.Disconnect module connector (A) from mainboard as shown in Figure 3-11.

3.Lift module from module bay.

4.Disconnect module connector (B) from module.

A

B

Figure 3-11. Slave HDD Module

Slave HDD Module Installation

1.Connect module connector (B) to module. Refer to Figure 3-11.

2.Place module into module bay.

3.Connect module connector (A) to mainboard.

4.Install slave HDD door.

Machine Maintenance Procedures 3-17