Touchpad Board Installation

1.Install board by pivoting it around guide pin (B). Refer to Figure 3-29.

2.Install and secure four (4) screws (A) (M2-0.4*2-I) to upper cover.

3.Install board FFC (C) to upper cover. Refer to Figure 3-28.

4.Connect board FFC (C) to board connector (D) and touchpad module connector (E).

5.Secure board FFC (C) to upper cover with adhesive tape.

6.Install touchpad module FFC (B) on upper cover.

7.Connect touchpad module FFC (B) to touchpad module connector (A).

8.Secure touchpad module FFC (B) with adhesive tape to touchpad module connector (A).

9.Install upper cover.

Machine Maintenance Procedures

3-33

Page 127
Image 127
Acer AS8950G manual Touchpad Board Installation