JVC GC-QX3HD 72 EN, Installing the USB Driver, Preparation, Select USB Mode with the Mode switch

72EN

SOFTWARESECTIONFORWindows®(cont.)

Installing the USB Driver

For details on the basic operation of Windows®, refer to the instruction manual provided with your computer or Windows®. Windows displayed on the right are examples of Windows® 98.

Preparation

Start Windows®.

●If you are running other software, close that software. (Make sure that there are no other application icons open on the task bar.)

1

2

3

Turn the Power dial to “B”.

•Hold the Lock button down while turning the Power dial.

Select “USB MODE” with the MODE switch.

•“USB MODE” appears on the LCD panel.

Connect the camera to the computer using the provided USB cable. (☞ pg. 71)

•The “Add New Hardware Wizard” window will appear.

4 Load the provided CD-ROM to the CD-ROM drive.

5 Click the “Next” button.

6 Click the “Next” button.

7 Confirm that “CD-ROM drive” has been checked, then click the “Next” button.

•When the loaded CD-ROM is not found, click “Browse” button and select the provided CD-ROM.

8 Click the “Next” button.

9 Click the “Finish” button.