22
EN
GETTING
STARTED
(cont.)
Inserting the Memory Card
Make sure to turn the Power dial to “OFF”, when inserting a Memory card. Memory card is not loaded in the camera, when purchasing the camera.
1 Open the Memory card cover. •Slide the knob towards “OPEN”.
2 Insert the Memory card.
•Insert the card so that the contact surface is facing up and the notch on the card is on the right.
•Do not touch the contact surface on the card.
3 Close the Memory card cover. •Slide the knob to lock the cover.
NOTES:
●There are two types of Memory cards (the 3.3V type which is indicated by a notch on the right side, and the 5V type which is indicated by a notch on the left side). This camera uses only Memory cards (3.3V) with a notch on the right side.
●The maximum memory card capacity that can be used with this camera is 64MB.
●To avoid damage to the Memory card, do not drop or strike the Memory card against hard objects.
●To protect the entire content of the Memory card after shooting, peel and stick a write protect sticker as shown in the right.
Contact surface
Where the write protect sticker is placed
3.3V5V
Removing the Memory Card
1
2
Open the Memory card cover.
•Slide the knob towards “OPEN”.
Remove the Memory card.
•Push on the card to remove it.
