JVC GC-QX3HD manual 46 EN, 6M Pro-Still Pixel Shift Mode GC-QX5HD only

46EN

MANUALSHOOTING(cont.)

6M Pro-Still (Pixel Shift Mode) (GC-QX5HD only)

The camera can achieve double its normal resolution by taking two pictures consecutively, shifting the CCD pixels one pixel row in the vertical direction between the two shots.

This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky hands.

4	3	2	4,5
			1
			SET 4

OFF M

V

1 Turn the Power dial to “M”.

•Hold the Lock button down while turning the Power dial.

2 Select “6M PRO S” with the MODE switch. •“6M PRO S” appears on the LCD panel.

3 Confirm that the self timer is set to “1 second“.

4 Point the lens at the subject, position yourself, and half-press the Shutter button.

•To display the image on the LCD screen while shooting, press the DISPLAY button.

5 Press the Shutter button all the way to take the picture.

•The shoot standby lamp (green) goes off when the shooting has finished.

NOTES:

●The picture size is automatically set to 2032 x 1536 with this mode.

●Due to large memory files created when shooting a picture of uncompressed quality in this mode, it is recommended that a Memory Card greater than 16MB be used.

●It takes a few seconds until the shooting finishes because this mode uses the exposure twice. Do not move the object and the camera until the shooting finishes completely.

●It is not possible to use the flash.

●When shooting in this mode with a fluorescent light source, the flickering of the fluorescent light causes a pattern of thin, horizontal stripes to appear in the image. This does not indicate a malfunction of the camera.

This mode should only be used with non- flickering light sources, such as sunlight or incandescent light.