48EN

MANUALSHOOTING(cont.)

NR Pro-Still (Noise Reduction Mode)

This mode reduces electronic noise in a photograph by layering several copies of the same image. This mode is ideal for shooting works of art in dark surroundings.

This mode uses the self timer to shoot a still picture. Use a tripod to prevent problems caused by shaky hands.

4 3 2 4,5

1

SET

4

OFF M

V

1 Turn the Power dial to “M”.

•Hold the Lock button down while turning the Power dial.

2 Select “NR PRO S” with the MODE switch. •“NR PRO S” appears on the LCD panel.

3 Confirm that the self timer is set to “1 second“.

4 Point the lens at the subject, position yourself, and half-press the Shutter button.

•To display the image on the LCD screen while shooting, press the DISPLAY button.

5 Press the Shutter button all the way to take the picture.

•The shoot standby lamp (green) goes off when the shooting has finished.

NOTES:

Due to large memory files created when shooting a picture of uncompressed quality in this mode, it is recommended that a Memory Card greater than 16MB be used.

It takes a few seconds until the shooting finishes because this mode uses the exposure 8 times. Do not move the object and the camera until the shooting finishes completely.

It is not possible to use the flash.

Page 48
Image 48
JVC GC-QX3HD, GC-QX5HD manual 48 EN, NR Pro-Still Noise Reduction Mode