Installing the PC Presenter

Installing the PC Presenter

This section describes how to connect the AXR-MSE to the PC and to the Central Controller. Before installation, check to verify that the Device DIP switch on the front panel of the AXR-MSE is set correctly. Setting the Device DIP switch is described in the previous section (Setting the TXC- MS(L) transmitter DIP switch section on page 7).

The PC Presenter can be set up for either stand-alone operation, or connected to a Central Controller via AXlink for system-wide control. The following sections describe both set-up scenarios.

Installing the PC Presenter for Stand Alone Operation

To use the PC Presenter as a stand-alone unit (not connected to AXlink), connect the AXR-MSE to the PC keyboard and mouse. As a stand alone unit, the PC Presenter controls PC keyboard and mouse functions. The following sub-sections describe connecting the PC Presenter for stand-alone operation.

The PC Presenter uses PS/2 style mouse and keyboard connectors.

Step 1: Connecting the AXR-MSE to the PC keyboard and PC

To connect the AXR-MSE to the PC keyboard and PC:

1.Turn off your PC.

2.Disconnect the PC keyboard from the CPU.

3.Connect the PC keyboard cable to the bottom KEYBOARD connector on the rear panel of the AXR-MSE.

4.Using the supplied keyboard cable, connect the keyboard connector on the CPU to the top KEYBOARD connector on the AXR-MSE (labeled TO PC).

Step 2: Connecting the AXR-MSE to the PC mouse and PC

To connect the AXR-MSE to the PC mouse and PC:

1.Turn off your PC.

2.Disconnect the PC mouse from the CPU.

3.Connect the PC mouse cable to the bottom MOUSE connector on the rear panel of the AXR-MSE.

4.Using the supplied mouse cable, connect the mouse connector on the CPU to the top MOUSE connector on the AXR-MSE (labeled TO PC).

Step 3: Connecting an optional external IR sensor to the AXR-MSE

The AXR-MSE uses an optional external IR sensor to receive IR signals from the TXC-MS(L). To connect an external IR sensor to the AXR-MSE, connect one or more optional IRX-SM+ swivel-mount IR receivers or IRX-DM+ IR receivers to the AXR-MSE as shown in FIG. 17.

PC Presenter

15

 

 

 

 

Page 19
Image 19
AMX Installing the PC Presenter for Stand Alone Operation, Connecting the AXR-MSE to the PC keyboard and PC