AMX PC Presenter instruction manual SW3 SW2

Pre-Installation

SW3

SW2

Top front view

FIG. 11 AXR-MSE internal circuit board showing the location of the SW2 and SW3 slide switches

FIG. 12 shows a close-up view of the SW2 and SW3 internal slide switches.

SW3

PS2 mouse

SW2

NO

PC

Serial mouse

PC

FIG. 12 Close-up view of SW2 and SW3 internal slide switches

1.Discharge the static electricity from your body and the screwdriver.

2.Unplug all connectors from the rear panel of the AXR-MSE.

3.Remove the four Phillips-head screws on the sides of the enclosure.

4.Remove the cover.

5.Set the AXR-MSE switch SW2 for use without a CPU as follows:

For keyboard use without a PC, slide the SW2 switch to the "NO PC" position shown in FIG. 13.

SW2

NO

PC

PC

FIG. 13 Switch setting for keyboard use without PC connected

PC Presenter 11