Pre-Installation

Pre-Installation

Setting the TXC-MS(L) transmitter DIP switch

The TXC-MS(L) transmitter transmits IR or RF signals, according to how you set position 1 on the 8-position DIP switch. The DIP switch is located under the battery cover, on the back of the TXC-MS(L), as shown in FIG. 6. To open the battery compartment, slide the cover down and remove.

8-position DIP switch

Battery compartment

FIG. 6 Location of 8-position DIP switch and battery compartment locations

FIG. 7 shows the eight-position transmitter DIP switch.

DIP switch #1

DIP switches

sets IR or RF

#2 - 4 are not used

transmission

 

DIP switches

#5 - 8 set the radio code of the transmitter

FIG. 7 Eight-position transmitter DIP switch

IR and RF Settings

The transmitter can be configured for either IR or RF, but not both. DIP switch position 1 sets the transmitter for IR or RF, as shown in FIG. 8.

IR mode

RF mode

FIG. 8 DIP switch settings for IR and RF modes

Set position 1 to Off (down) for IR.

Set position 1 to On (up) for RF.

PC Presenter

7

 

 

 

 

Page 11
Image 11
AMX PC Presenter instruction manual Pre-Installation, Setting the TXC-MSL transmitter DIP switch, IR and RF Settings