Introduction

FIG. 4 Laser Radiation warning

AXR-MSE Wireless Mouse and Keyboard Controller

The AXR-MSE is the receiver/processor component of the PC Presenter. The AXR-MSE receives RF or IR signals from the TXC-MS(L) transmitter using the attached RF receiving antenna or an external IR sensor. The AXR-MSE connects between the PC keyboard and mouse cables, and the keyboard and mouse ports on the PC CPU. The AXR-MSE uses a standard four-pin captive wire AXlink connector to connect to an AMX Central Controller.

AXR-MSE Specifications

Dimensions (HWD)

• 1.86" x 5.63" x 4.06" (4.72 cm x 14.29 cm x 10.31 cm)

 

• Height with antenna: 5.49" (13.96 cm)

 

• Depth with connectors - 4.06" (4.47 cm) and with antenna - 5.12" (13.00 cm)

 

 

Power

65 mA (max draw) @ 12 VDC

 

 

Enclosure

Metal with black matte plastic

 

 

Receive frequency

RF: 418 MHz standard (other frequencies are available)

 

 

Front Panel

 

 

 

AXlink

Green LED indicates AXlink communication as follows:

 

• Off indicates no power or the controller is not functioning properly

 

• One Blink per Second indicates normal operation. Device numbers match the

 

programmed device numbers in the Axcess program on the master.

 

• Full On indicates that there is no AXlink activity.

 

 

DIP switch

8-position sets the AXlink device ID

 

 

MOUSE LED

Red LED indicates mouse data transmission activity

 

 

KEYBOARD LED

Red LED indicates keyboard data transmission activity

 

 

DATA LED

Red LED indicates RF or IR signal reception

 

 

 

4

PC Presenter

 

 

 

Page 8
Image 8
AMX PC Presenter instruction manual AXR-MSE Wireless Mouse and Keyboard Controller, AXR-MSE Specifications, Front Panel