3-5
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter3 Installing the Client Ad apter Inserting a Client Adapter
Figure3-3 Inserting a PCI Card into a PC
Step6 Tilt the card to enable the LEDs to slip through the opening in the CPU back panel. See the enlarged
view in Figure3-3.
Step7 Press the card into the empty slot until its connector is firmly seated.
Caution Do not force the card into the expansion slot; this could damage both the card and the slot. If the card
does not insert easily, remove it and reinsert it.
Step8 Reinstall the screw on the CPU back panel and replace the computer cover.
Assembling the Antenna
Follow the steps below to assemble the PCI card’s antenna.
Step1 Slide the antenna through the opening in the bottom of the antenna base.
Step2 Position the antenna so its notches are facing the Cisco label on the front of the base. See Figure3-4.
STATUS
ACTIVITY
95582
STATUS
ACTIVITY
2
13
1Antenna cable
2LEDs
3Card edge connector