Cisco Systems CB21AG manual After Your EAP-FAST Password Expires

Chapter 6 Using EAP Authentication

Using LEAP or EAP-FAST with an Automatically Prompted Login

Figure 6-4 Enter Wireless Network Password Window

The LEAP or EAP-FAST Authentication Status window appears.

Step 3 If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision a PAC, click Yes.

Step 4 If your client adapter authenticates, the window shows that each stage was successful and then disappears. The logon or boot-up process completes.

If the authentication attempt fails, an error message appears after the authentication timeout period has expired. Refer to the “Error Messages” section on page 10-12for the necessary action to take.

After Your EAP-FAST Password Expires

If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to change your password.

Step 1 When the Please Change Password window appears (see Figure 6-5) to indicate that your password is invalid, enter your old password in the Old Password field.

Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide

OL-4211-03 6-7