Sun Microsystems 3900, 6900 manual Sun Proprietary/Confidential Internal Use Only, with fru stat

TABLE 8-1Storage Automated Diagnostic Environment Event Grid for the Sun StorEdge T3+ Array

Component	Event Type	Severity	Action	Description		Action
power.fan	Alarm-	Red	Y	The state of a fan on the	1.	Open a Telnet session
				Sun StorEdge T3+ array		to the affected Sun
				is not optimal.		StorEdge T3+ array.
					2.	Verify the fan state
						with fru stat.
					3.	Replace the power
						cooling unit, if
						necessary.
power.output	Alarm-	Red	Y	The state of the power in	1.	Open a Telnet session
				the Sun StorEdge T3+		to the affected Sun
				array power cooling unit		StorEdge T3+ array.
				is not optimal.	2.	Verify power cooling
						unit state in fru stat.
					3.	Replace power
						cooling unit, if
						necessary.
power.temp	Alarm-	Red	Y	The state of the	1.	Open a Telnet session
				temperature in the Sun		to the affected Sun
				StorEdge T3+ array		StorEdge T3+ array.
				power cooling unit is	2.	Verify that the power
				either too high or is		cooling unit state is in
				unknown.		fru stat
					3.	Replace the power
						cooling unit, if
						necessary.
log	Alarm	Red	Y	This event includes all	Check the /messages
				important errors found.	file for appropriate
					action.
time_diff	Alarm	Yellow	Y		Fix the date and time on
					the Sun StorEdge T3+
					array using the date
					command. The date and
					time should be the same
					as the monitoring host.

98 Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003

Sun Proprietary/Confidential: Internal Use Only