Sun Microsystems 6900, 3900 manual SRN/SNMP Single Point-of-Failure Descriptions

SRN/SNMP Single Point-of-Failure

Descriptions

TABLE A-2provides Simple Network Management Protocol (SNMP) descriptions, associated Service Request Numbers (SRNs), and recommendations for corrective action.

TABLE A-2		SRN/SNMP Single Point-of-Failure Table
					SRN after
					Corrective
	SRN		SNMP Description	Corrective Action	Action
	70020		• The SAN topology has changed.	• Check the SAN cabling and	70020
	70021		• The Global SAN configuration has	connections between the Sun	70030
	70030		changed.	StorEdge T3+ array andthe	70051**
	70050*		• The SAN configuration has	virtualization engine.
			changed.	• Perform Sun StorEdge T3+ array
			• A physical device is missing.	failback, if necessary.
	70025		The IP of the partner’s virtualization	Check the Ethernet cabling and	None
			engine is not reachable.	connections.
	72000		• The SAN topology has changed.	• Check cabling and connections	70020
	72007		• The Global SAN configuration has	between the virtualization engines.	70021
	70020		changed.	• Cycle power on failed	70022
	70021		• The SAN configuration has	virtualization engine, if the fault LED	70024*
	70022		changed.	flashes.	70030
	70025		• The IP of the partner virtualization	• Perform Sun StorEdge T3+ array	70050
	70030		engine is not reachable.	failback, if necessary.
	70050
			• A physical device is missing.	• Enable VERITAS path.
			• A SLIC virtualization engine is	• Check the SLIC virtualization
			missing.	engine.
			• A SLIC daemon connection is
			inactive.
			• The virtualization engine failed to
			check for SAN changes, or a daemon
			error occurred.
			• A secondary daemon connection is
			active.
	* Sun StorEdge T3+ array LUN failover.
	** Sun StorEdge T3+ array LUN failback.

Appendix A Virtualization Engine References 159

Sun Proprietary/Confidential: Internal Use Only