Sun Microsystems 3900, 6900 manual To Verify the Storage Service Processor

▼To Verify the Storage Service Processor

1.Run the Sun StorEdge T3+ array port listmap command to see the failover event.

# t3b0:/:<1>port listmap
port targetid addr_type			lun	volume	owner	access
u1p1	0	hard	0	vol1	u1	primary
u1p1	0	hard	1	vol2	u1	failover
u2p1	1	hard	0	vol1	u1	failover
u2p1	1	hard	1	vol2	u1	primary

2.Compare the virtualization engine configuration to a saved configuration by running runsecfg(1M).

3.Choose Verify Virtualization Engine Map.

The output is from the diff(1) command, which shows the lines that have been added, changed, or deleted. Notice that the active Sun StorEdge T3+ array controller WWN for one of the Sun StorEdge T3+ arrays has changed, indicating it is using its alternate path.

MANAGE CONFIGURATION FILES MENU

1)Display Virtualization Engine Map

2)Save Virtualization Engine Map

3)Verify Virtualization Engine Map

4)Help

5)Return

Select configuration option above:> 3

Verifying Virtualization Engine map for							v1
ERROR: virtualization engine map for v1							has changed.
18c18
<	t3b01	5	T49153	116.7		0.7		50020F230000725B	1
> t3b01		5	T49153	116.7		0.7		50020F2300006DFA	1
28c28
< t3b01		T49153	50020F230000725B				60020F2000006DFA
> t3b01		T49153	50020F2300006DFA				60020F2000006DFA
37c37
< I00002		2900006022004186			v1b		Yes	08.14	0
> I00002		2900006022004186			Unknown		No	Unknown	0
46d45
< Undefined			210000E08B026C0F I00002					Yes	0
	checkvemap:	virtualization engine map v1 verification complete: FAIL.

FIGURE 8-3Manage Configuration Files Menu

92 Sun StorEdge 3900 and 6900 Series 2.0 Troubleshooting Guide • March 2003

Sun Proprietary/Confidential: Internal Use Only