Sun Microsystems 6900, 3900 manual Sun Proprietary/Confidential Internal Use Only, Description

TABLE 7-1Storage Automated Diagnostic Environment Event Grid for 1 Gbit Switches (Continued)

Component					Note: Text within quotation marks (“ “) is exactly as it appears on the Event Grid.
	EventType	Severity	Action	Description			Action Required
chassis.	Alarm	Yellow		“Switch sw1a was rezoned”
zone
				This event reports changes
				in the zoning of a switch.
enclosure	Audit			“Auditing a new switch
				called ras	d2-swb1
				(ip=xxx.0.0.41)
				10002000007a609”
oob	Comm_			“Communication regained
	Established			with sw1a
				(ip=xxx.20.67.213)”
oob	Comm_	Down	Y	“Lost communication with		1.	Check Ethernet
	Lost			sw1a			connectivity to the
				(ip=xxx.20.67.213)”			switch.
						2. Verify that the switch is
				Ethernet connectivity to the			booted correctly with no
				switch has been lost.			POST errors.
						3. Verify that the switch
							Test Mode is set for
							normal operations.
						4.	Verify the TCP/IP
							settings on switch by
							way of Forced PROM
							Mode access.
						5.	Replace switch, if
							needed.
switch	Diagnostic	Red				Check Test Manager for
test	Test-					failure details.

Chapter 7 Troubleshooting Switches 79

Sun Proprietary/Confidential: Internal Use Only