Chapter 6 Command Reference

Command Details

Field descriptions for the output of this command are listed below:

Active

Processor is operational and remote console/logging is active.

 

 

Online

Processor is operational but remote console/logging is not active.

 

Note This state commonly occurs when a processor is not enabled by the

 

application running on the MWAM.

 

 

Inactive

Processor is rest or resetting, and remote console/logging is inactive.

 

 

Proving

The remote console connection is testing the IP path between the Supervisor

 

and MWAM processor before moving to the ACTIVE state. If there is a

 

configuration problem or VLAN mismatch, the connection may stay in Proving

 

state until the configuration issue is resolved.

 

 

ttynum

Line number of the user with an active command on the processor. A value of

 

-1 indicates no user.

 

 

Logging Level

Indicates the maximum severity level at which the Supervisor displays logger

 

messages from an MWAM.

 

 

timeouts

Number of occurrences of remote command execution time-out.

 

 

logevents

Number of logging events.

 

 

sequence errors

Protocol sequence errors caused by overrun or time-out.

 

 

reset count

Number of times the connection reset because of connection time-out or

 

MWAM processor reload.

 

 

KPA_missed

Number of keepalives missed.

 

 

send seq

Sequence number of remote commands sent.

 

 

tty recv seq

Sequence number of remote command response messages received from the

 

MWAM processor.

 

 

log recv seq

Sequence number of remote logging messages received from the MWAM

 

processor.

 

 

Current queue count

Number of messages received at the Supervisor and queued to be processed

 

(logged/displayed).

 

 

IP addr

IP address of the MWAM processor.

 

Note Typically, this is an internal address, but it can be a defined address,

 

such as the one shown in processor 6 (06/6) in the example. Use the

 

logging main-cpucommand on the MWAM processor to define a

 

different IP address, if required.

 

 

Multiprocessor WAN Application Module User Guide

6-18

OL-4858-07

 

 

Page 18
Image 18
Cisco Systems OL-4858-07 manual Command Reference Command Details