Cisco Systems OL-4858-07 manual Show mwam, Following examples illustrate the show mwam command

Chapter 6 Command Reference

Command Details

show mwam

To show MWAM Transation Look-aside Buffers (TLBs) and cache errors, use the show mwam command in privileged EXEC mode.

	show mwam
Syntax Description	show mwam	Displays MWAM TLBs and cache errors.
Defaults	There are no default behavior or values.

Command Modes

Command History

Privileged EXEC

ReleaseModification

12.3(5a)B This command was introduced.

Usage Guidelines This command can be used to provide information about TLBs and cache errors.

Examples		The following examples illustrate the show mwam command:
		mwam-7-2#show mwam
		Slot Number: 7, Complex	Number: 1, Global Session	Number: 2
		2 active cpu(s) in complex
		Gi0/0 IDB: 0x235D978C, MAC address: 0005.9a38.3820
		Gi0/1 IDB: 0x235F0BF8, MAC address: 0200.0000.0110, IP address: 128.0.1.2
		Gi0/2 IDB: 0x23606778, MAC address: 0200.0000.0120
		Network IO Interrupt Throttling:
		throttle count=0, timer count=0
		active=0, configured=0
		netint usec=4000, netint mask usec=200
		512k of L2 cache shared between CPU 0 and 1
		TLB entries (49/64 used):
		Virt Address range	Phy Address range	Attributes
		0x10000000:0x101FFFFF	0x020000000:0x0201FFFFF	CacheMode=2, RW, Valid
		0x10200000:0x103FFFFF	0x020200000:0x0203FFFFF	CacheMode=2, RW, Valid
		0x20200000:0x203FFFFF	0x000200000:0x0003FFFFF	CacheMode=5, RO, Valid
		0x20400000:0x205FFFFF	0x000400000:0x0005FFFFF	CacheMode=5, RO, Valid
		0x20600000:0x207FFFFF	0x000600000:0x0007FFFFF	CacheMode=5, RO, Valid
		0x20800000:0x20FFFFFF	0x000800000:0x000FFFFFF	CacheMode=5, RO, Valid
		0x21000000:0x211FFFFF	0x001000000:0x0011FFFFF	CacheMode=5, RO, Valid
		0x21200000:0x213FFFFF	0x001200000:0x0013FFFFF	CacheMode=5, RO, Valid
		0x21400000:0x2147FFFF	0x001400000:0x00147FFFF	CacheMode=5, RO, Valid
		Multiprocessor WAN Application Module User Guide
	6-34			OL-4858-07