Wegener Communications 562 Appendix 1 Terminal Diagterm Commands, Apx 1.1 Diagterm Group Commands

Unity 552 User’s Manual

APPENDIX 1 TERMINAL DIAGTERM COMMANDS

The iPump 562 provides command-line interface, Diagterm. The diagterm can be accessed either using a RS-232 serial port or logging through LAN IP interface using Linux. The diagterm commands are used to control or monitor the IRD operations. This method may be used in conjunction other ways to control or monitor, namely, Compel and OSD.

Apx 1.1 Diagterm Group Commands

Some of the Diagterm terminal commands are grouped under common group name. The commands belonging to a group perform related functions. Following is a list of groups and their commands along with synopsis for each. A general syntax for the group command is:

Table Apx 1.1: Diagterm Group Commands
Group Name: rp
Command	Synopsis
ca	Report Conditional Access Information
rec	Report Recovery Status
rf	Report RF Parameters
Group Name: r

Command	Synopsis
c	Report Carrier Status
st	Report Preset Table
s	Report Settings Status
p	Report Configuration Information
ns	Report Network Services Status
http	Report HTTP Information
g	Report Compel Group Table

rReport Relays Status

www.wegener.com 800092-01 Rev. A 47