Wegener Communications 562 manual Elapsed Times screen, Query Network History

Operation

Elapsed Times screen

Use following steps to display the Elapsed Times screen on the OSD menu:

1.Navigate to the Signal Quality screen. See Signal Quality screen on page 32

OR from a Signal Quality sub-screen, press the left arrow button to go back to the

Signal Quality screen.

2.Press the down arrow button to select Elapsed Times.

3.Press Enter.

4.View the details as shown in Figure 3.26.

Figure 3.26: iPump 562 OSD Elapsed Times

Query Network History

Use following steps to display the Network History screen on the OSD menu:

1.Navigate to the Unit Status screen, see Unit Status screen on page 31.

2.Press the down arrow button to select Network History.

3.Press Enter.

4.View the details as shown in Figure 3.27.

34 800092-01 Rev. A www.wegener.com