Wegener Communications 562 manual Indicator Threshold screen options, Signal Strength Meter screen

Set Subtitling options

		Unity 552 User’s Manual
Table 3.5: Indicator Threshold screen options
Option	Possible values	Comments
Errored Secs per Min	10 to 19	Set the threshold for how many errors per
		minutes before raising a warning condition.

Signal Strength Meter screen

Use following steps to display Signal Strength Meter screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Carrier Settings.

3.Press Enter.

4.Press the down arrow button to select Signal Strength Meter.

5.Press Enter to view the screen as shown in Figure 3.9.

Figure 3.9: iPump 562 OSD Signal Strength Meter Screen

Subtitling Setup screen

Use following steps to display Subtitling Setup screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Subtitling Setup.

3.Press Enter.

4.View the details as shown in Figure 3.10.

www.wegener.com 800092-01 Rev. A 21