Wegener Communications 562 manual Monitor Signal Quality, LNB configuration options

Monitor

Signal

Quality

Unity 552 User’s Manual

Figure 3.6: iPump 562 OSD LNB Setup Screen

Use the LNB Setup screen to set and display the LNB configuration.

Table 3.4: LNB configuration options

Option	Possible values	Comments
LNB Type	Local Oscillator or Universal/ASTRA	Only Local Osc option allows
		other options to be set.
LO Type	Custom Freq., Std C-band, US Ku-	Only Custom Freq. option
	band, Euro Low Ku-band or Euro Hi	allows other options to be set.
	Ku-band
LO Custom Freq.

Signal Quality Setup screen

Use following steps to display Signal Quality Setup screen on the OSD menu:

1.Press any push-button on the front-panel to display the Main Menu.

2.Press the down arrow button to select Carrier Settings.

3.Press Enter.

4.Press the down arrow button to select Signal Quality Setup.

5.Press Enter to display the Signal Quality Setup screen shown in Figure 3.7.

www.wegener.com 800092-01 Rev. A 19