|
| Unity 552 User’s Manual | |
|
|
|
|
Option | Possible values | Comments |
|
|
|
|
|
Composite Out | NTSC_M, NTSC_J, PAL/50 or | Selects video output format |
|
| PAL/60 |
|
|
|
|
|
|
Component Out | 480i, 480p, 576i, 576p, 720p or | Selects video output format. When a DVI/HDMI device |
|
| 1080i | is connected, the mode shall be automatically set to |
|
|
| Slave. |
|
|
|
|
|
Component | 50 or 60 or 59.94 | Configures the video/vertical refresh rate |
|
|
|
|
|
HDMI Out | - | Displays current display mode of the DVI/HDMI device |
|
|
| after EDID negotiation. |
|
|
|
|
|
Setup Audio
Use following steps to display Audio Setup screen on the OSD menu:
1.Navigate to the Unit Setup screen, see Unit Setup screen on page 23.
2.Press the down arrow button to select Audio Setup.
3.View the details as shown in Figure 3.15.
Figure 3.14: iPump 562 OSD Audio Setup
Use the Audio Setup screen to set and display the audio output options.
Table 3.8: Audio Output Options
Option | Possible values | Comments |
|
|
|
Audio Port | 1 or 2 |
|
|
|
|
Audio Language | A01 or *** |
|
|
|
|
Audio Routing | Stereo or Left/Right on both | May be used for two languages |
|
|
|
Audio Attenuation | 0 through 20 |
|
|
|
|
S/PDIF Mode | Passthru, Linear PCM or Off |
|
|
|
|
www.wegener.com | 25 |
