Xerox 4500 ps eth IPX/SPX Configuration, Remember to set “IPX/SPX enabled” toYES, EPS Password

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

IPX/SPX Configuration

Remember to set “IPX/SPX enabled” toYES.

Use the space bar to toggle through the options

<PrintServer>			ConfigureIPX/SPX			0xx.xxx
Frames:1)802.2:YES 2) SNAP: YES
		A)	NCP mode		:
		B)	NCP preferred Server		:
		C)	NCP preferred DStree		.....:
		D)	NCP DSname context		:
		E)	EPS mode		:
		F)	EPS PrintServer		:
		G)	EPS FileServer		:
		H)	EPS Bindery Poll Tim		:
		I)	EPS Password		:
	X) Save and Return			Z)	Return without saving
EnterSelection

NOTES:

Bindery Poll Time

If version 4.x (DS) is selected as NCP mode, the entry “Bindery Poll Time” will NOT appear in the test printout. It will, however, be maintained as an entry in Telnet, regardless of NCP mode.

EPS Password

This password must be a match of the NetWare PServer password.

When printing you should check the connection to the PServer viewing the NetWare menu “Active Connections”.

ida 802.2 Configuration

<PrintServer>			Configureida802.2			0xx.xxx
		A)	Alias Name		:
	X) Save and Return			Z) Return without saving
Enter Selection:

57