Xerox 4500 ps eth PSF/2 AFP Printing Using TCP/IP, Creating a new printer profile, Requirements

PSF/2 AFP Printing Using TCP/IP

Xerox 4500 PS ETH, Inst. & Operator's Guide

17. PSF/2 AFP Printing Using TCP/IP

This chapter provides details on how to:

Create an IPDS printer profile

Setup the “Keep Alive” TCP/IP feature

Requirements:

Before IPDS printing using TCP/IP can be accomplished, the following points need to be checked:

1.OS/2 2.0 with APAR IR28716 or later version must be installed.

2.TCP/IP 2.0 with CSD UN64092 or later version must be installed

3.PSF/2 1.10 with CSD UR41102 or later version must be installed

Once the above conditions have been met and the basic TCP/IP installation of the PrintServer (IPDS) been completed before direct AFP/IPDS from PSF/2 will be possible.

17.1 Creating a new printer profile

From the PSF/2 control panel you make the following selections:

1.Select Profile

2.Select New

The following panel will appear:

139