Xerox 4500 ps eth SNA IPDS and SCS Printing from MVS or VM, PrintServer Definition file extract

SNA IPDS and SCS Printing from MVS or VM

Xerox 4500 PS ETH, Inst. & Operator's Guide

PrintServer Definition file extract

&&??##N1,0#	; Start of file - Don't remove this !
;------------------------------------------------------------------------

;Configuration for the TokenRing PrintServer

;(This is an example. Please modify the parameters to match

;your configuration).

;00824001

;------------------------------------------------------------------------

;*************************************#**********************************

;							I D A P S
;*************************************#**********************************
BEGIN_CONFIGURATION					IDAPS
			LOCAL_MAC		40005A0001C2; Set LOCAL MAC-address
			SEL_MAC		LOCAL		; Use universal MAC-address
		EARLY_TOKEN			YES		; Early Token Release DISABLED.
		ENABLE_TCPIP			YES		; ENABLE TCP/IP protocol.
		ENABLE_NETWARE YES					; ENABLE Netware protocol .
		ENABLE_802_2			YES		; ENABLE 802.2 protocol .
		ENABLE_PU_LU			YES		; ENABLE PU/LU protocol.
		BOOT			YES		; Reboot PS if conf. has changed.
		SHARETIMEOUT			20		; Share timeout (sec.)
		HOLDTIMEOUT			600		; Timeout for OFFLINE c ondition (sec.)
		IRQTIMEOUT			60		; Timeout for IRQ forwarding (Sec.)
END
;*************************************#**********************************
;							T C P I P
;*************************************#**********************************
BEGIN_CONFIGURATION TCPIP
HOSTNAME					"idaPS005"		; The TCP/IP host name of the PS
	BOOTP				NO		; Boot from BOOTP server
	TCP_MSS				1400		; Message Segment Size
	TCP_WINDOW				4200		; Receive window
	DEFAULT_IP				192.0.16.12		; IP-address if not booted by BOOTP
	DEFAULT_SM				255.255.0.0		; Subnet Mask if not booted by BOOTP
	DEFAULT_GW				192.0.16.3		; Gateway addr. if not booted by BOOTP
END
;*************************************#**********************************
;							P U
;*************************************#**********************************
BEGIN_CONFIGURATION PU
	BLOCKNUMBER			05D		; Fill in your Block number
	IDNUMBER			00000		; Fill in your ID number
	REMOTE_MAC			400031740001; Fill in HOST / GW MAC address
	LOCAL_SAP			4		; Fill in your local SAP value
	REMOTE_SAP			4		; Fill in your HOST SAP value
END

&&??

127