Xerox 4500 ps eth instruction manual Bootptab

Configuration

Xerox 4500 PS ETH, Inst. & Operator's Guide

Typical BOOTPTAB file entry:

ps13: ht=ETH: ha=00036e00172a: ip=192.0.110.1:\

sm=255.255.255.0: gw=192.0.110.0: bf=/tcp/etc/myfile.cf2

Fig. 3-2 BOOTPTAB file sample (OS/2 environment)

where

ht = ETHER (Ethernet hardware type) ha= 00036E00172A (MAC address) ip = 192.0.110.1 (IP address)

sm = 255.255.255.0 (subnet mask) gw = 192.0.110.0 (gateway)

bf = /TCP/etc/myprint.cf2 (path to boot file; i.e. name of the bootfile that is used for print server setting)

For a full list of notations used in the BOOTPTAB file please see above.

NOTES:

1.The bootfile and microcode must be in the same disk partition as

BOOTPTAB.

2.A forward slashindicates directory path in bootfile specifica tion

3.A back slashmeans line continuation

For details on modifying the configuration file, see section 3.6.

78